Imprinter for teak MATT CHEM Mattco

IMPRINTER FOR TEAK

MATTCO is a slightly amber Imprinter for teak.

MATTCO does not contain resins and synthetic polymers.

MATTCO avoids moisture in the wood and thus delays the biological degradation of wood by microorganisms.

MATTCO does not flake, does not yellow and will not crack.

MATTCO contains anti-UV agents.

MATTCO nourishes the wood and gives him back his warm tone.

MATTCO highlights the fibers, the grain, the vein of teak.

MATTCO used pure. Apply with a brush on a teak previously cleaned, dusted off and perfectly dry.

Well shake the product before use.

Apply 1st thin uniform and regular in the sense of the wood at a room temperature of at least 15 ° C. Wait a few moments and apply a 2nd layer always in the direction of the wood. Wait 30 minutes for a complete drying

before re-use of the surfaces.

Maximum protection is effective at the end of 12 hours at room temperature of 15 ° C (cold and moisture slowed the drying time)

Indicative average around 10 m² per litre.

Technical features:

• Physical state: liquid
• Mass voluique: 815 g / l +/-20 g/l
• Chemical reaction: neutral
• Smell: Characteristic of solvent
• Color: AMBER