Black glue (400grs) MATT CHEM Matt Flex PuTTY

MASTIC GLUE BASED M.S POLYEMRE (BLACK)
M.S. polymer PuTTY without solvent, isocyanate, or silicone.
Ready to use and does not require the application of a primer for its implementation.
Keeps its flexibility even after drying and hardening, which reduces the risk of cracking.
Rich in dopes of stickiness allowing it to adhere even on wet surfaces. Can be used for caulking and bridges teak finish since it has a high resistance to the rays UV can be sanded and painted.
Joint implementation : a cartridge = 2.5/3 m of 10 mm joint
Application in collage by cord : a cartridge = 12 m 5 mm recovery elastic > 80% according to ISO 7389.
Holding temperature:-30 ° to + 80 ° (120 ° to a point)
Technical features Densité............................................ 1,44 Shore A............................................ 50 following ISO 868 Module at 100%... 1,2 MPa according to ISO 37 elongation at break... 400% according to ISO 37 Resistance to breaking... 1.9 Mpa according to ISO 37 is 20kgs to cm2. Elastic recovery... > 80% according to ISO 7389 DMA... 20% resistance to UV... Very good creep... No holding temperature-30 ° C to + 80 ° C (120 ° C in peak) smoothing time... 10 minutes at 23 ° C / 50% HR polymerization... 3 mm 24 h at 23 ° C / 50% HR