Group of electronic water 40L / min UP MARCO, 12 / E

MARCO electronic water group.

The system is managed by a microprocessor that acts on the characteristics of pump operation based on usage and its power supply.

Description:

Self-priming gear pump equipped with a check valve non return and an electronic pressure sensor that allows the use of this pump on circuits of water under pressure.

Construction:

• Nickel-plated brass body
• PTFE gear
• Axis attached to lip and stainless steel.
• The pressure sensor is calibrated factory of 2 to 3 bar depending on the model.

Self-priming:

The pump is provided with a small valve slightly open at start of the pump, in order to let air escape and facilitate the priming. As soon as the pump is primed the valve closes.

Application:

These pumps can be used as pump transfer or as a group of water within the limits of the allowed liquids: fresh water and sea water (max 40 ° C), gas oil of viscosity from 2 to 5.35 cSt (37.8 ° C)
Not allowed liquids:
-Gas
-Flammable liquids with Point of Fusion
-Food products
-Corrosive chemicals
-Solvents

Technical features:

• Model: UP12/E
• Tension: 12V or 24V (see option)
• FUSE: 12V - 35 A / 24 v - 25 A
• Flow: 40L / min
• Pressure: 3 bar
• Size: 249 x 213 x 112 mm
• Weight: 4 kg