Group of electronic water 10L / min MARCO UP 2 / E

Print

More info

MARCO electronic water group.

The system is managed by a microprocessor that acts on the characteristics of pump operation based on usage and its power supply.

Description:

Self-priming gear pump equipped with a check valve non return and an electronic pressure sensor that allows the use of this pump on circuits of water under pressure.

Construction:

Nickel-plated brass body
PTFE gear
Axis attached to lip and stainless steel.
The pressure sensor is calibrated factory of 2 to 3 bar depending on the model.

Self-priming:

The pump is provided with a small valve slightly open at start of the pump, in order to let air escape and facilitate the priming. As soon as the pump is primed the valve closes.

Application:

These pumps can be used as pump transfer or as a group of water within the limits of the allowed liquids: fresh water and sea water (max 40 ° C), gas oil of viscosity from 2 to 5.35 cSt (37.8 ° C)
Not allowed liquids:
-Gas
-Flammable liquids with Point of Fusion
-Food products
-Corrosive chemicals
-Solvents

Technical features: